PUBLICIDADE

quinta-feira, 11 de julho de 2013

Configurando um ddns para o mikrotik no site no ip


==============SCRPT==============================

# No-IP automatic Dynamic DNS update

#--------------- Change Values in this section to match your setup ------------------

# No-IP User account info
:local noipuser "E-MAILDONOIP"
:local noippass "SUA_SENHA"

# Set the hostname or label of network to be updated.
# Hostnames with spaces are unsupported. Replace the value in the quotations below with your host names.
# To specify multiple hosts, separate them with commas.
:local noiphost "URLDINAMICA"

# Change to the name of interface that gets the dynamic IP address
:local inetinterface "INTERFACE"

#------------------------------------------------------------------------------------
# No more changes need

:global previousIP

:if ([/interface get $inetinterface value-name=running]) do={
# Get the current IP on the interface
   :local currentIP [/ip address get [find interface="$inetinterface" disabled=no] address]

# Strip the net mask off the IP address
   :for i from=( [:len $currentIP] - 1) to=0 do={
       :if ( [:pick $currentIP $i] = "/") do={
           :set currentIP [:pick $currentIP 0 $i]
       }
   }

   :if ($currentIP != $previousIP) do={
       :log info "No-IP: Current IP $currentIP is not equal to previous IP, update needed"
       :set previousIP $currentIP

# The update URL. Note the "\3F" is hex for question mark (?). Required since ? is a special character in commands.
       :local url "http://dynupdate.no-ip.com/nic/update\3Fmyip=$currentIP"
       :local noiphostarray
       :set noiphostarray [:toarray $noiphost]
       :foreach host in=$noiphostarray do={
           :log info "No-IP: Sending update for $host"
           /tool fetch url=($url . "&hostname=$host") user=$noipuser password=$noippass mode=http dst-path=("no-ip_ddns_update-" . $host . ".txt")
           :log info "No-IP: Host $host updated on No-IP with IP $currentIP"
       }
   }  else={
       :log info "No-IP: Previous IP $previousIP is equal to current IP, no update needed"
   }
} else={
   :log info "No-IP: $inetinterface is not currently running, so therefore will not update."
}
=========================FIM=============================

5 comentários:

  1. Amigo, queria saber se tivermos um balance, colocaremos o IP do balance certo ???

    ResponderExcluir
  2. Amigo aqui só funciona na minha propiá rede, quando tento acessar de outro lugar ele da erro na porta 80, tem como ajudar?

    ResponderExcluir
  3. Não funcionou aqui, esta tudo certo porem não atualiza nunca.

    ResponderExcluir
  4. aki não funcionou, na hora que eu tento logar pelo ddns fala usuario e senha invalido... sendo que estão correto, e no log Dns update successufull

    ResponderExcluir
  5. Apolo muito obrigado .... Funciona perfeitamente. Troquei a porta 80 para 8080 e funciona sem problemas.

    ResponderExcluir

FERRAMENTA MIKROTIK

Get our toolbar!